Do Pellet Stoves Need A Chimney in 2022? [Yes or No?]

Nowadays, a pellet stove is installed in most houses. It provides the same heating service as other stoves and comes with a different venting system.

Well, does it needs somewhat airflow? Like a chimney?

Yes, for the ventilation of a stove, we remember the traditional chimney.           

do pellet stoves need a chimney

So, do pellet stoves need a chimney?

No, pellet stoves do not need a chimney. An exhaust pipe is preferable for the venting system. Moreover, if the house has a chimney, you can install the stove with it.        

A pellet stoves is quite different than a traditional one. To know about this, follow us to the end to know.

Can You Vent a Pellet Stove Through an Existing Chimney? 4 Steps Process

Of course, you can vent a pellet stove through an existing chimney. An existing chimney will lessen your task of venting the stove. Using it, there won’t be any need to install other vent systems in your house.

However, to vent the stove through the chimney, you may need to work a little bit harder. Don’t worry; t it won’t take a long time as the chimney is already set.

So, here we are, presenting a detailed step-by-step process to assist you. Let’s check them out together.           

Step 1: Clean the Chimney

Cleaning the chimney first will lead you to success easily. As sometimes an existing chimney may have some defaults in it, this will cause bigger issues later.

Other than that, creosote, dirt, debris, and ashes are quite common in a chimney. Therefore, the chimney needs to be inspected and cleaned thoroughly. 

Doing it will let you know about any defects and the chimney condition.         

Step 2: Get a Chimney Liner  

Though there is a steel liner with the stove, a new chimney liner is needed. Due to installing the steel liner, you won’t be able to check or clean the chimney.

That’s why, we recommend getting a new chimney liner, which will let you inspect the chimney without any difficulty. Also, you can do it without moving the stove.         

Step 3: Install the Liner

From now on, you may need a person to help you. It will half the stress of yours.

Next, use an insulating material to cover up the chimney liner. Then, take it to the roof and set the liner into the chimney. Be more careful while doing it as you to save from roof accidents. 

Set the liner as per your local ordinance regarding its height. After that, use a top plate and a cap to cover the chimney liner. These will prevent water from coming inside.

Sealing a chimney crown is, undoubtedly,  safer. Thus, we recommend you get the best chimney crown sealer to be more secure.   

Step 4: Seal the Liner o the Stove

At the final step, let’s move back to the stove. Take the liner from the chimney and use a liner adapter to seal the liner.

Now move it to the exhaust hole of the stove carefully. You may need another person’s help to move the stove. After that, connect it carefully and inspect it again.

Finally, sealing the connection will end your task. And see, your pellet stove is successfully vented through the existing chimney.  

Install a Pellet Stove in the Basement

Installing a pellet stove in the basement provides better heating flow on every floor. It prevents a cold and freezing basement during wintertime. But is it that easy?

Following an effective installation process can make it a piece of cake. That’s why, we explained the steps simply and assure you that you can surely do it.

Have a look what we have got for you.          

Step 1: Choose A Place for the Stove

Choosing a place suitable for the pellet stove is necessary. Look for a flat space with no combustible things around it.

If you have any kind of carpet or wallpaper, remove it from the place where you want to place the stove.

Select a place where there will be 18 to 20-inch space left from each side and overhead of the stove. Place all the other things in a corner as you are going to need a large space for installing the stove.   

Step 2: Place the Pellet Stove 

Afterwards, place the pellet stove near a window. If there is no window in the basement, set it near an exhaust fan of the basement.

Don’t hesitate to take help of another person to place the stove. Plus choose the best basement pellet stove to fit and work perfectly.  Half the battle is done.

Step 3: Measure the Pipe

Measuring the vent is important for venting the stove properly. In most cases, pellet stoves connect with a 4-inch vent.

Therefore, you need to measure the vent pipe to get a perfect size. Otherwise, it won’t fit the stove.

In case you are unaware of the vent size, you can call an expert to get the correct size. Or, even go through the manuals.        

Step 4: Make the Foundation 

We already said to select a flat and balanced place as it will be needed for the venting system. Thus, don’t wait and make a foundation of 18-inches deep.

Now, the wide range will be 4-feet long. The measurements should be accurate to do it successfully. Otherwise, the venting process won’t be of any help.

You do not need to worry if your floor is not flat enough or not. Just use cement layers to flat it according to the venting pipe.       

Step 5: Electrical Needs

As you already selected the place for the stove, the stove may need some electrical changes. These can be a new outlet or a power strip.

If these are already near the stove, you are saved from any modifications.

Otherwise, you need to set one near it. We recommend you call an expert electrician in case you are unable to do it.      

Step 6: Set the Alarms

The stove needs both the vent and the stove alarm. These will help in observing the temperature and finding any inconsistencies.

To do this, first, shut off the pellet stove to set the alarms. Take the necessary tools to complete it. We assure you that installing these is quite simple.

Lastly, wire the alarms to be set electrically. Now, turn on the stove and the alarms to see your success.      

Can a Pellet Stove Produce Heat During Load-Shedding?      

Answer: Yes, a pellet stove can produce heat during load-shedding. The pellet stove will be turned off if there is load-shedding. But till the fire is burning, there will be heat. So, do not open the stove doors till the power comes back.

Which One is Cheaper Between an Electric Stove and a Pellet Stove?    

Answer: A pellet stove is cheaper than an electric stove. Since a pellet stove does not need a chimney, it saves a lot of money. Moreover, it requires less fuel to generate heat. Thus, it costs less than the electric one.          

What Happens When a Pellet Stove is Installed Near the Staircase?   

Answer: When a pellet stove is installed near the staircase, it keeps both the upper and lower floors warm. As a result, it won’t let any floor feel the lack of heat. Moreover, many homeowners prefer the staircase quite a lot for a pellet stove.     

Final Thoughts

Overall, you see, installing a pellet stove in your house is not any hard task. Rather, if someone asks you “do pellet stoves need a chimney?”, you know the right answer with ease. 

If this detailed guide help you, please don’t forget to mention us. That’s what makes our efforts count.

See you next time with another solution to any of your problems.